About MotoScan for BMW Motorcycles
MotoScan provides a professional diagnostic for most current BMW motorcycles using a OBDLink LX/MX, UniCarScan UCSI-2000 or ELM327(with restrictions) diagnostic adapter. Please tell us your impressions, suggestions and...
MotoScan provides a professional diagnostic for most current BMW motorcycles using a OBDLink LX/MX, UniCarScan UCSI-2000 or ELM327(with restrictions) diagnostic adapter. Please tell us your impressions, suggestions and wishes:
[email protected]
+++ Information Source +++
For extensive information about the app, see https://www.motoscan.de
The full version can be purchased directly from the App. Please check before buying the functions on your motorcycle with the Lite version of the app. In the Lite app you can fully test, however, the display of the data is very limited and it is not possible to run most service functions.
+++ Functions +++
Functions differs depending on the bike model and equipment. Likewise, the scope of individual control devices is different. The app is constantly under development and number of functions grows with every update.
The following functions are available *:
- Identification of the control unit
- Read and clear the trouble codes
- Read Freeze Frames
- Real-time data (sensor parameters, input and output signals)
- Actuators control
- Service interval reset
- ECU coding
- Read and reset adaptations
*Functions on the control unit and degree of development of the app depends. Not all controllers have all the above-mentioned functions. In order to accelerate the development, please send us the log files.
+++ Required hardware +++
Most ELM327 adapters support the diagnostic on BMW motorcycles, but there are also bad China Clones that do not support all commands. For these purposes, a test function in the app have integrated, that it allows to check the adapter for suitability and indicates whether the diagnostic adapter for K-Line and CAN bus motorcycles is suitable. The OBDLink LX and MX adapters are basically suitable for all BMW motorcycles with K-Line and CAN Bus (Latest Firmware update 4.1.x required. Contact us to get it).
The second component is a 16/10 pin adapter cable is required. Available at:
http://www.wgsoft.de/de/shop/obd-zubehoer/kabel/bmw-motorrad-adapterkabel-10pin-auf-obd-2.html
+++ Supported BMW motorcycle models +++
C-Series
- K18 (C 600 Sport)
- K19 (C 650 GT)
F-Series
- K70 (F 700 GS)
- K71 (F 800 S, F 800 ST, F 800 GT)
- K72 (F 650 GS, F 800 GS)
- K75 (F 800 GS Adventure)
- K73 (F 800 R)
- R13 (F 650 GS, GS Dakar)
- K14 (F 650 CS)
G-Series
- R13 (G 650 GS, G 650 GS Sertao)
- K16 (G 450 X)
- K15 (G 650 Xchallenge, Xmoto, Xcountry)
K-Series
- K40 (K 1200 S, K 1300 S)
- K43 (K 1200 R. Sport, K 1300 R)
- K44 (K 1200 GT, K 1300 GT)
- K48 (K 1600 GT, K 1600 GL)
- K589 (K 1100 RS, K 1100 LT)
- K589 (K 1200 RS, K 1200 LT)
R-Series
- K50 (R 1200 GS)
- K51 (R 1200 GS Adventure)
- K52 (R 1200 RT)
- K21 (R nineT)
- K25 (R 1200 GS, R 1200 GS Adventure)
- K26 (R 900 RT, R 1200 RT)
- K27 (R 1200 R)
- K28 (R 1200 ST)
- K29 (R 1200 S, HP2 Sport)
- K30 (R 1200 CL)
- R21 (R 1150 GS, Adventure)
- R22 (R 850 RT, R 1150 RT, R 1150 RS)
- R28 ( R850 R, R 1150 R, Rockster)
- 259C (R 850 C, R 1200 C, Montauk, Independet)
- 259 (R 1100 S, R 1100 RS)
Previous Versions
Here you can find the changelog of MotoScan for BMW Motorcycles since it was posted on our website on 2016-12-24 10:00:16.
The latest version is 1.92 and it was updated on 2024-04-19 17:24:52. See below the changes in each version.
MotoScan for BMW Motorcycles version 1.91
Updated At: 2023-08-26
Changes: - ESA calibration for LC models
- ESA level sensor calibration for LC models
- FTE ABS venting test
- RDC sensor training for new models from MY2023
- Added battery voltage display to the bottom status bar
- BMS-MP: Real-time data integrated in KWP models
- RDC: real-time data on K001 models
- Coding: Fixed restoring encoding
- Favorites works only 1 time after restart
- Various small corrections
MotoScan for BMW Motorcycles version 1.83
Updated At: 2023-07-10
Changes: - The license is activated immediately after purchase
- Portuguese language improved (Thanks to Anderson S.)
- In-App Billing changed to the new v3 requirements
- Italian language improved (thanks to Carlo F.)
- K63 S1000R added
- Corrected Russian text for NL translation (actuators control)
- Service reset for 10.5 inch TFT instrument cluster
- Bleed the ABS on the R nineT K21, K22, K23, K32, K33, K34, K35
MotoScan for BMW Motorcycles version 1.71
Updated At: 2021-11-07
Changes: - New models added K82, K34, K35, K60, K66
- Adaptations reset for BMS-X, BMS-MP, BMS-O
- Learn the throttle sensor for BMS-X, BMS-MP, BMS-O
- Service reset for 2D Race speedometer
- Coding for 2D Race speedometers
- Real-time data for BMS-E2B, KOMBI K03
- Actors control for BMS-E2B
MotoScan for BMW Motorcycles version 1.66
Updated At: 2021-01-01
Changes: - Extend the path to the control unit in the lower status bar
- Lots of translations for various languages with real-time data, actuators and error codes for the newer models
- ABS modules available again on K1X models.
- New models added: F900R (K83), F900XR (K84), S1000RR (K67), S1000XR (K69), C400X (K09), C400GT (K08), C evolution (K17 )
- Real-time data for the newer generations completely revised
- Actor diagnosis for newer models added
- Codes for the newer models released
MotoScan for BMW Motorcycles version 0.62
Updated At: 2020-05-06
Changes: - Very many global changes in the internal structures of the app
- KOMBI K18 the values until the next service in the service reset mask are displayed
- Read I-level and equipment codes also on newer models of engine control unit and instrument cluster
- Favorites function corrected
- Logo adapted to the new Android versions, so that it is displayed correctly
- Selection for the new models added: F 750 GS, F 850 GS, R 1250 R / RS / RT / GS
- ESA calibration improved on K 1200 models
MotoScan for BMW Motorcycles version 0.57
Updated At: 2019-09-17
Changes: ZFE BASIC and LOW: Calibrate the film sensor of the tank contents sensor
ZFE BASIC: Codes coded for coding index 07
ZFE HIGH: calibrate ESA front and back
ABS2 K15: Venting, actuator control, freeze frames and real-time data
Integral ABS2 K25: venting, actuator control and real-time data
BMSK: Block the idle actuators for the synchronization of cables
Favorite assignment corrected
MotoScan for BMW Motorcycles version 0.45
Updated At: 2016-12-10
Changes: v0.45 beta,Optimierung der Kommunikation mit WLAN interfaces.,v0.44 beta,Das ABS Steuergerät für F650GS (R13) und C1 hinzugefügt. Incl. Fehlercodes und Echtzeitdaten.,v0.42 beta,- Spanische Sprache hinzugefügt. Danke an Emilio R.,- Echtzeitdaten für viel Steuergeräte bei neuen Motorrädern K50/K48 Generation,- RDKS (TPMS) Sensoren anlernen bei K50/K48 Generation ist jetzt möglich. Einzelheiten zu RDKS siehe www.motoscan.de
Disclaimer
Official Google Play Link
We do not host MotoScan for BMW Motorcycles on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for MotoScan for BMW Motorcycles is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
